BUDGET
BUDGET
X
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
Galvanized rectangular tube 30x25x1.5
Welded steel galvanized smooth pipe
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 30x25x1.5
Weight 1.27 Kg/m
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 30x25x1.5
Weight 1.27 Kg/m
Support Pole 35 1m00 Green Plastified
Security support pole used to increase stability along with a adjustable clamp.
Steel sheet groved relief plate-2000x1000x5
Steel sheet groved relief plate is a decorative metal coating with anti-slip effect due to its relief.
Steel sheet groved relief plate is ideal for frequent walkways, such as stairs or elevator floors.
Steel sheet groved relief plate is also widely used for hole lids, water or electricity meter covers, oil tanks, heating, etc.
Steel quality S235JR
Mesures 2000 x 1000 x 5 mm.
Surface 2,00
Weight 92,00
Steel sheet groved relief plate is ideal for frequent walkways, such as stairs or elevator floors.
Steel sheet groved relief plate is also widely used for hole lids, water or electricity meter covers, oil tanks, heating, etc.
Steel quality S235JR
Mesures 2000 x 1000 x 5 mm.
Surface 2,00
Weight 92,00
Post Brico Fax 1m00 Galvanized
Post Brico Fax 1m00 Galvanized
In the price of the post are included the tube, 65 the cap and the necessary accessories for the installation of the gate with cemented post system.
In the price of the post are included the tube, 65 the cap and the necessary accessories for the installation of the gate with cemented post system.
Pannel Decor Plastified RAL 1m50
Width:2m750
High:1m489
Panel made of 40x40x1,5mm horizontal sections and 25x25mm square-shaped bars, thickness 1,5mm (vertical). Rapid assembly without welding.
High:1m489
Panel made of 40x40x1,5mm horizontal sections and 25x25mm square-shaped bars, thickness 1,5mm (vertical). Rapid assembly without welding.
Post Fence Maxi Fax 2m00+0m60
Post type Lux-80 reinforced by 3mm/t.a. (W=12,11cm3) or LUX 80-1,5mm/t.a. (W=5,6cm3), according to heights, provided with a longitudinal rack for anchoring the accessories that will secure the panel (Fax bracket). Low carbon sheet, in accordance with the EN-10142 standard. Pull strength of 300 to 500 N/mm2. Posts provided with polypropylene cap which is not degradable by the weather elements.
Iron railing 810 upright
Railing 810 Supplementary uprights.
BREAKDOWN OF MATERIAL
Stile made with 40x40 solid
Anchor plate 100x100x5
The uprights have a decorative element to the upper part and are perforated to place the anchors of the panels.
You can select the finish option.
Steel sheet embossed in teardrop 2000 x 1000 x 5 mm.
Steel sheet embossed in teardrop is a decorative metal coating with anti-slip effect due to its relief.
Steel sheet embossed in teardrop is ideal for frequent walkways, such as stairs or elevator floors.
Steel sheet embossed in teardrop is also widely used for hole lids, water or electricity meter covers, oil tanks, heating, etc.
Steel quality S235JR
Medidas 2000 x 1000 x 5 mm.
Surface 2,00
Weight 88,00
Steel sheet embossed in teardrop is ideal for frequent walkways, such as stairs or elevator floors.
Steel sheet embossed in teardrop is also widely used for hole lids, water or electricity meter covers, oil tanks, heating, etc.
Steel quality S235JR
Medidas 2000 x 1000 x 5 mm.
Surface 2,00
Weight 88,00
Iron pipe 16x16x1 mm.
0,49 kg/m
Length: 6000 mm.
Section in mm. 'h' Height: 16 mm
Section in mm. 'b' Width: 16 mm
Section in mm. 'e' Density: 1 mm
Steel:S235JR
Length: 6000 mm.
Section in mm. 'h' Height: 16 mm
Section in mm. 'b' Width: 16 mm
Section in mm. 'e' Density: 1 mm
Steel:S235JR
Panel FAX 2m00 3 folds galvanized
OUTSTANDING
Rigidity and quality of the materials
Exceptional life thanks to the anticorrosion coating
Non-removable security screw system
Easy installation
Complete system
TECHNICAL FEATURES
Electrowelded panel with several folds to improve its rigidity. Dimensions of the panel: 200/50. Diameter of the wire: 5mm. Upper or lower defensive edge, in accordance with the orientation of the panel.
Post type Lux 50 or Lux 80 according to heights, provided with a longitudinal rack for anchoring the accessories that will secure the panel (FAX bracket). Low carbon sheet, in accordance with the EN-10142 standard. Pull strength of 300 to 500 N/mm2. Posts provided with polypropylene cap which is not degradable by the weather elements.
Rigidity and quality of the materials
Exceptional life thanks to the anticorrosion coating
Non-removable security screw system
Easy installation
Complete system
TECHNICAL FEATURES
Electrowelded panel with several folds to improve its rigidity. Dimensions of the panel: 200/50. Diameter of the wire: 5mm. Upper or lower defensive edge, in accordance with the orientation of the panel.
Post type Lux 50 or Lux 80 according to heights, provided with a longitudinal rack for anchoring the accessories that will secure the panel (FAX bracket). Low carbon sheet, in accordance with the EN-10142 standard. Pull strength of 300 to 500 N/mm2. Posts provided with polypropylene cap which is not degradable by the weather elements.
Fire door 1 sheet EI290-C5 1000x2070
Fire doors are designed to be placed in areas where there is a risk of fire, preventing the spread of fire from one side to the other.
They are homologated according to the Technical Building Code (EI290 C5) and have been tested in accredited laboratories according to the standard UNE EN 1634-1.
The frame is made of galvanized sheet steel of thickness 1 - 5 mm, and it has 6 staples for the union in work. Around the whole frame there is an intumescent seal of high dilation.
The door leaf is composed of two trays of galvanized steel sheet with a thickness of 0,6 mm and inside it a rigid panel of rock wool with a thickness of 55 mm (160 kg / m²).
Between the hinges there is a safety pivot to avoid that the door can be removed or deformed by the heat. Are made of galvanized steel according to UNE EN 1935.
The handle is metal lined in black polyamide and the bombin complies with the UNE EN 12209 standard.
They are homologated according to the Technical Building Code (EI290 C5) and have been tested in accredited laboratories according to the standard UNE EN 1634-1.
The frame is made of galvanized sheet steel of thickness 1 - 5 mm, and it has 6 staples for the union in work. Around the whole frame there is an intumescent seal of high dilation.
The door leaf is composed of two trays of galvanized steel sheet with a thickness of 0,6 mm and inside it a rigid panel of rock wool with a thickness of 55 mm (160 kg / m²).
Between the hinges there is a safety pivot to avoid that the door can be removed or deformed by the heat. Are made of galvanized steel according to UNE EN 1935.
The handle is metal lined in black polyamide and the bombin complies with the UNE EN 12209 standard.
Cold laminated shet 2000 x 1000 x 0,8 mm.
Steel quality DC01
Measures 2000 x 1000 x 0,8 mm.
Surface 2
Weight 13,12
Measures 2000 x 1000 x 0,8 mm.
Surface 2
Weight 13,12
Pannel Fence Ritmo 2m00 Galvanized 3 Folds
Electrowelded panel. Dimensions of the panel: 200/50. Diameter of the wire: 8/6/8mm or 6/5/6mm. Upper or lower defensive edge, in accordance with the orientation of the panel.
Rectangular tube 20x15x1,5 mm.
Kilos: 0.78 kg/m
Length: 6000 mm.
Section in mm. "h" Height: 20 mm
Section in mm. "b" Width: 15 mm
Section in mm. "e" 1.5 mm"
Steel:S235JR
Stainless steel rectangular tube de 30 x 20 x1 mm.
Stainless steel rectangular tube de 30 x 20mm. y 1mm. Of tickness and length de 6000 mm.
Finished in matt, frosted, satin and polished.
Welding in high frequency.
Qualities AISI 304L EN 1.4307 and AISI 316L EN 1.4404.
Remember to specify properties before requesting a quote.
Finished in matt, frosted, satin and polished.
Welding in high frequency.
Qualities AISI 304L EN 1.4307 and AISI 316L EN 1.4404.
Remember to specify properties before requesting a quote.
Beam UPN - 200
PRECIO POR METRO LINEAL
Kilos: 25,93 kg/m
Length: 6000 mm.
Section in mm. "h" Height: 200 mm
Section in mm. "b" Width: 75 mm
Section in mm. "e": 8,5 mm
Secció en mm. "e1": 11,5 mm
Calidad: S275JR
To buy
.
Gear motor with controls panel 203RR complete built anti crushing sensor, integrated 433 Mhz radio receiver, speed control and slow down in opening and closing, motor control by encoder.
Gear motor with controls panel 203RR complete built anti crushing sensor, integrated 433 Mhz radio receiver, speed control and slow down in opening and closing, motor control by encoder.
Panel FAX Double thread 6/5/6 1m00 Green plastified
Electrowelded panel. Dimensions of the panel: 200/50. Diameter of the wire: 8/6/82m50x1m03 or 6/5/62m50x1m03. Upper or lower defensive edge, in accordance with the orientation of the panel.
Width x Height: 2m50x1m03
Width x Height: 2m50x1m03
To buy
Motorreductor con cuadro de maniobra 203RR, 1400 revoluciones, receptor radio incorporado y control del motor con encoder.
simple laminated green torsion lattice mesh 50/14 2m
Roll 25 mts x 2mts. Single-torsional twisted diamond-shaped twisted wire, made of wire of at least 4000 N/mm2 of resistance., Mesh light 50, Plated green,
Galvanized round tube-30x1.5
Welded steel galvanized smooth pipe
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Diameter 30x1.5
Weight 1.09 Kg/m
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Diameter 30x1.5
Weight 1.09 Kg/m
Corrugated iron 25 mm
PRICE PER LINEAR METRE
Kilos: 3.98 kg / m
Length: 6000 mm.
Diámetreo: 25 mm.
Steel: B500S
Kilos: 3.98 kg / m
Length: 6000 mm.
Diámetreo: 25 mm.
Steel: B500S
Round profile stainless (inox) steel bar diameter 9
Solid round profiles
Length 6000 mm.
Qualities AISI-304 and AISI-316.
Diameter 9mm.
Weight 0,50 Kg/m
Choose the quality options before making the request for quotation.
Length 6000 mm.
Qualities AISI-304 and AISI-316.
Diameter 9mm.
Weight 0,50 Kg/m
Choose the quality options before making the request for quotation.
Post fence FAX 1m80 LUX Diameter 80 Galvanized
Post type Lux 80 according to heights, provided with a longitudinal rack for anchoring the accessories that will secure the panel (FAX bracket). Low carbon sheet, in accordance with the EN-10142 standard. Pull strength of 300 to 800 N/mm2. Posts provided with polypropylene cap which is not degradable by the weather elements.
Galvanized square tube 30x30x2
Welded steel galvanized smooth pipe
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 30x30x2
Weight 1.82 Kg/m
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 30x30x2
Weight 1.82 Kg/m
Galvanized square tube 35x35x1.5
Welded steel galvanized smooth pipe
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 35x35x1.5
Weight 1.63 Kg/m
Quality s 235 (st37)
Bar length: 6 meters
Normativa UNE-en 10219
Measures 35x35x1.5
Weight 1.63 Kg/m
Pannel Classic Green Plastified 2m00
Panel made of 40x40x1,5 (horizontal sections) and 30x30x1,5 (vertical sections), with 300x50 electrowelded mesh, diameter 5mm and 6mm. Rapid assembly without welding.
Square profile stainless (inox) steel bar 30 x 30 mm.
Solid square profiles
Length 6000 mm.
Qualities AISI-304 and AISI-316.
Diameter 30mm.
Weight 7,11 Kg/m
Choose the quality options before making the request for quotation.
Length 6000 mm.
Qualities AISI-304 and AISI-316.
Diameter 30mm.
Weight 7,11 Kg/m
Choose the quality options before making the request for quotation.
Hot laminated shet 2500 x 1250 x 2 mm.
Steel quality S235JR
Measures 2500 x 1250 x 2 mm.
Surface 3,13
Weight 51,25
Measures 2500 x 1250 x 2 mm.
Surface 3,13
Weight 51,25
Pannel Ritmo Double Thread 1m20 Green Plastic
Welded woven wire pannels with multiple knots to increase rigidity. Dimensions of the panels: 200/55. Wire diameter: 5mm. Defensive spike finishing on top or bottom following pannel orientation.
Platen 14x4 mm
PRICE PER LINEAR METER
Â
Kilos:Â 0,46 kg/m
Length: 6000 mm.
Section in mm. "h" Height:Â 14,0 mm
Section in mm. "b" Width:Â 4,0 mm
Steel: S275JR
Harness
ECOSAFEX 2 | SOLO - (EN 361) |
The most commonly used basic harness and reliable market.
1 point anchor: dorsal ring
+ 1 mooring fixture 0.8 m
+ 2 carabiners
Iron railing Pannel ref 811
Attention !!
The price is calculated by a minimum of 10 units. For lower amounts, you need to check the price.
Panel of 40x20 mm tube railing. of easy installation. Ready to attach directly to the corresponding numbers.
The amounts are used separately from the modules and they can be tied to the ground base plate and screws or inside the concrete. In this case, it is supplied 20 cm longer.
The length of each panel without stitches is 1920mm.
The height is 1050mm.
CLOTHING OF MATERIAL
Top bar of 40x20x2 tube
Bottom bar of Tub of 40x20x2
Bernals 20x20x1,5
Painted optional
See if you need variations in the model shown. (Shape, tailor made, etc.)
Stailess steel ASTM A312 round tube 5S O60,33mm
ASTM A312 round tube made of stainless steel with heat treatment
Length 6000mm.
Length without welding between 5000 and 7000.
External diameter 60,33
Tickness 1,65
Weight
Nominal diameter in inches 2 "
Sélectionnez les options i soudure qualité avant de demander le budget.
Length 6000mm.
Length without welding between 5000 and 7000.
External diameter 60,33
Tickness 1,65
Weight
Nominal diameter in inches 2 "
Sélectionnez les options i soudure qualité avant de demander le budget.
Self Supporting Portal Green Plastified 9m00x2m00
The Cantilever Gate is ideal for areas where high space available for the opening of the gate (about 2 times the span of the gate), areas where the ground that regulary covered with snow, places where there is constant traffic of vehicles and heavy trucks, such as quarries, factories, warehouses, airports and military installations.
Technical details:
Gates with a total access available from 5 to 9 meters in only one leaf. Beam lower with a profile of 120x120x4mm Frame with a profile of 100x50x2mm Interior filling of the leaf 35x35x1,5mm.
Technical details:
Gates with a total access available from 5 to 9 meters in only one leaf. Beam lower with a profile of 120x120x4mm Frame with a profile of 100x50x2mm Interior filling of the leaf 35x35x1,5mm.
Nove Fence Post 0m60 Green Plastified
Ø60x2mm steel-plated posts, depending on height. Polypropylene cap wich is not degradeable by the weather elements.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
visits 14954049
Thanks for visiting our store
Browse through our site and if you have questions you can pass to the section Contact
clicking here
Now! If on the contrary would suggest we also can do something in the box
Hopefully everything is your liking and see you soon!
Secure payment with