Fire Doors RF 1 Leaf EI260-C5 - Dimensions 1230X2500 x 2500 mm (123 cm x 250 cm)

Fire doors are designed to be placed in areas where there is a risk of fire, preventing the spread of fire from one side to the other.

They are approved according to the Technical Building Code (EI260-C5) and have been tested in accredited laboratories in accordance with the UNE EN 1634-1 standard.

The frame is made of galvanized steel sheet with a thickness of 1.5 mm, and has 6 staples for assembly on site. All around the frame there is a high expansion intumescent seal.

The door leaf is composed of two trays of galvanized steel sheet with a thickness of 0.6 mm and inside it has a rigid panel of rock wool with a thickness of 55 mm (160 kg/m²).

Between the hinges there is a security pin to prevent the door from being removed or deformed by heat. They are made of galvanized steel according to the UNE EN 1935 standard.

The handle is metal covered in black polyamide and the cylinder complies with the UNE EN 12209 standard.

Attention: You can complete your fire door with:

• Panic bar
• Door closer
• Special hardware (peephole, mirrors, electromagnet and holder ...)
• Ventilation grilles

Any questions? Feel free to contact us!